Raymarine RAY91 - Raymic Handset Controls; Powering the Base Station; Powering the Handset

5.1Raymichandsetcontrols
TheRaymichandset’scontrolsareshownbelow.
1.Power—Presstopowerthehandseton.Press
andholdfor3secondstopowerthehandsetoff.
Momentarypresstoaccesstheshortcutlist.
2.
PTT(PushtoT alk)—Pressandholdtosendavoice
message.Releasetoreturntoreceivemode.
Note:Themaximumtransmittimeislimitedto5
minutestopreventun-intentionaltransmissions
fromoccupyingtheVHFchannel.
3.Microphonelocation
4.
VolumeUpandVolumeDown—Presstoadjust
volumeorsquelchupordown.
5.LCDscreen
6.Back—Movebackthroughmenuoptions.
7.
OK/menubutton—Pressbuttontoaccessmenu/
DSCfunctionsandtoconfirmselections.
8.
16/+—Whenpoweredonpresstoswitchbetween
prioritychannels.
9.
HI/LO—PresstoswitchbetweenHigh(25W)and
low(1W)transmitpower.
10.
DISTRESS—Liftupthespringloadedcoverand
pressthisbuttontomakeaDSCdistresscall.
11.
ChannelUpandChannelDown—Changesthe
channelupordown.
12.VOL/SQ—Pressbuttontoswitchbetweenvolume
andsquelchcontrol.
13.
Built-inspeaker
5.2PoweringtheBasestation
TheBasestationautomaticallypowersupwhen
connectedtoasuitablepowersupply.
TheBasestationispowereddownbyunpluggingfrom
thepowersupplyor,ifapplicable,bytrippingit’scircuit
breaker.
Poweringthehandset
WiththeBasestationpoweredOnandtheHandset
connected:
1.PressthePowerbutton,locatedonthetopofthe
Handset.
TheHandsetwillpoweron.
2.TopowerofftheHandset,pressandholdthe
Power
buttonforapproximately3seconds,untilthescreen
turnsoff.
34