Raymarine RAY91 - Enabling Shared Brightness; Initial Startup; Selecting a Language

•theSharebrightnesssettingsettoOnforallunits
inthebrightnessgroup.
•unitstobeassignedtoNetworkGroups.
•allthedisplaysinthatgrouptobesynchronized.
EnablingSharedBrightness
FromtheDisplaySet-upmenu:(Menu>Set-up>
DisplaySet-up).
1.SelectSharedBrightness.
2.SelectSharedBrightnessagaintoenableShared
Brightness.
If Shared Brightness is already enabled then
selecting this menu item will disable Shared
Brightness.
3.SelectGroup.
4.Selectthegroupthatyouwanttoassigntheradioto.
AdjustingtheBrightnesssettingwillnowchangethe
brightnessofallproductsassignedtothatgroup.
5.6Initialstartup
Unlessyourradiohasbeenpre-programmed;thefirst
timeyoupower-upyourradioyouwillberequestedto
selectcertainoptions.WiththeexceptionofyourMMSI
andATISID,youwillalsoberequestedtoenterthese
optionsafterafactoryreset.
Afteracknowledgingthestartupscreen,unless
previouslysetyouwillbepromptedtomakethe
followingselections:
1.Languageselection—See5.7Selectingalanguage
foravailablelanguages.
2.TurnonAISreception(Ray70andRay91only)—
Enablesthebuilt-inAISreceiver.Thisstepisonly
applicabletoradioswithabuilt-inAISreceiver.
See5.8SwitchingontheAISreceiverformore
information.
3.Selectnetworktype—Selectswhichconnectionto
transmitAISandDSCinformationon,toconnected
equipment.ThisstepisonlyapplicableiftheAIS
receiverwasturnedoninthepreviousstep.See5.9
Selectinganetworktypeforavailableoptions.
4.EnterMMSInumber—RequiredtoenableDSC
functions.Thisoptionisnotrequiredafterafactory
reset,oriftheradiohasbeenpre-programedin
MARCOM-Cmode,orhasATISenabled.See5.10
EnteringanMMSInumberformoreinformation.If
notalreadyselectedyouwillalsobepromptedto
selectyournetworktype.
5.EnterATISID—Requiredwhentheradiowillbe
usedintheinlandwaterwaysofEurope.Thisstepis
onlyapplicableiftheradiohasbeenpre-programed
inMARCOM-Cmode.See5.11EnteringanATISID
formoreinformation.
6.Frequencybandselection—Setstherelevant
channelsforyourregion.Thisstepisnotapplicable
iftheradiohasbeenpre-programedinMARCOM-C
mode.See5.12Changingtheradioregionformore
information.
5.7Selectingalanguage
Thelanguagetheradiousescanbechanged.
FromtheMainmenu:
1.Select
Set-up.
2.SelectLanguage.
The languages available are:
• English (default) — English
• Español — Spanish
• Français — French
• Deutsch — German
• Italiano — Italian
3.Selectthelanguagethatyouwanttheradiotobe
setto.
TheUserinterfacelanguageischangedtotheselected
language.
38