Raymarine RAY91 - Entering Your ATIS ID; Enabling and Disabling ATIS Mode

7.WhenthefinaldigitisconfirmedselectDONE.
Example
8.TheMMSIisdisplayedonscreen,checkthatitis
correct,then:
i.Select
Y es–Save,or
ii.ifthenumberenteredisnotcorrectselect
No–
Retry.
Caution:MMSIandATISID
entry
Y oucanonlyentertheMMSInumberand
ATISIDonce!
IfyoustoreanincorrectMMSInumberor
ATISIDinyourproduct,itwillhavetobe
resetbyanauthorizedRaymarine
®
dealer.
5.11EnteringyourATISID
AuniqueATISIDmustbeenteredbeforeATISmode
canbeenabled.
FromtheMainmenu.
1.Select
Set-up.
2.Select
ATISset-up.
3.Select
ATISID.
Not set will be displayed if no ATIS ID has been set.
The first digit is set to a ‘9’ and cannot be changed,
this is because all ATIS IDs start with a ‘9’.
As most ATIS IDs consist of a ‘9’ followed by your 9
digit MMSI number; if your radio already has an MMSI
number the ATIS ID will be pre - filled in this format.
4.IftheATISIDhasbeenpre-filled,checkitcarefully
againstyourissuedATISID.
5.ToenteryourATISIDmanually,usetheRotaryknob
tocyclethroughtheavailablenumbersandpress
OK
toconfirmeachnumberandmovetothenextdigit.
Y ou should only enter the unique 10 digit ATIS ID
provided by your licensing authority.
6.PresstheBackbuttonatanytimetoeditdigitsyou
havealreadyentered.
7.PressandholdtheOKbuttontodisplayoptionsto
Movecursorbackandforwardthroughthedigits.
8.Whenthefinaldigitisconfirmedselect
DONE.
Example
9.TheATISIDisdisplayedonscreen,checkthatitis
correct,then:
i.Select
Y es–Save,or
ii.ifthenumberenteredisnotcorrectselect
No–
Retry.
Caution:MMSIandATISID
entry
Y oucanonlyentertheMMSInumberand
ATISIDonce!
IfyoustoreanincorrectMMSInumberor
ATISIDinyourproduct,itwillhavetobe
resetbyanauthorizedRaymarine
®
dealer.
EnablinganddisablingATISmode
ATISisaEuropeansystemusedonsomeinland
waterways.AuniqueATISIDmustbeenteredtouse
ATISmode.
WithATISmodeenabledtheradio’sregionwillbe
fixedtotheINT(international)frequencybandandthe
followingfunctionsaredisabled:
•DSCfunctions
•WatchMode
•ScanMode
40