Chap t e r 6 : I ns t al l at i on
51
Pow e r suppl y connect i on
ïThe control head requires its own dedicated power supply. It cannot
source power from SeaTalk, and must supply the power to the rest of
the SeaTalk system.
ïA 2†m (6.5†ft) power lead terminated with 1/4†inch spade connectors
is supplied for this purpose.
ïA 12†A circuit breaker, or fuse, must be fitted to the +12†V supply.
D3287-1
Power Cable
Brown (+)
12A Fuse
or circuit
breaker
Blue (-)
ïThe power lead can be extended if required. The following table
shows the minimum acceptable cable sizes :
Ca b l e Le n g t h Co p pe r Ar e a AWG
Up t o 2.5 m (8 f t ) 1. 0 mm2 18
Up t o 4.0 m (13 f t ) 1. 5 mm2 16
Up t o 6.0 m (19.5f t ) 2.5 mm2 14
To Next Page
Loading...
