Raymarine ST4000 Plus - Tiller Pins; Cabling and Socket Installation; Cabling

Chap t e r 6 : I ns t al l at i on
75
Dimension G Pedestal Socket Part No.
Lengt h L
38 mm (1.50 in) St andard dimension
76 mm (3.00 in) 38 mm (1.50 in) D026
89 mm (3.50 in) 50 mm (2.00 in) D027
102 mm (4.00 in) 64 mm (2.50 in) D028
114 mm (4.50 in) 76 mm (3.00 in) D029
127 mm (5.00 in) 89 mm (3.50 in) D030
Tiller pi ns
For certain non-standard installations a range of tiller pins is available.
Description Size Part No.
Sma l l t h r ea d ed t i l l er p i n 2 5 mm ( 1 . 0 0 i n ) D 0 1 4
Ex t r a l en gt h t i l l er p i n 7 2 mm ( 2. 8 0 i n ) D 0 20
Ex t r a l en gt h t h r ea ded t i l l er p i n 7 2 mm ( 2. 8 0 i n ) D 0 21
Ca b l i n g a n d so ck e t i nst a l l a t i o n
ïThe actuator is connected to the control head using a water proof
plug and socket.
ïThe plug comes ready assembled to the actuator.
ïThe socket should be mounted in the cockpit next to the actuator.
Ca b l i ng
Using the following table as a guide, route a cable of a suitable size
from the rear of the socket back to the control head.
Ca b l e l e ng t h Co p pe r a r e a AWG
Up t o 2.5 m (8 f t ) 1. 0 mm2 18
Up t o 4.0 m (13 f t ) 1. 5 mm2 16
Up t o 6.0 m (22 f t ) 2. 5 mm2 14