82 ST4000 Plus Wheel & Tiller Autopilots Owner’s Handbook
Operat ing sense
The operating sense defines the direction the helm will be applied when
a course change key is pressed or the vessel goes off course. Check the
operating sense as follows:
1. Wheel Pilot: Engage the clutch lever.
Tiller Pilot: Place the actuator over the tiller pin. If necessary,
extend or retract the push rod using the -1, +1, -10 or +10 keys.
Extending and Retracting the
Tiller Pushrod
Use any of these
keys to extend or
retract the pushrod
Engaging the clutch
on the Wheel Pilot
1
2
D3395-1
2. Press the +10 key. The helm should move to produce a turn to
starboard.
To Next Page
Loading...
