viii ST60+ Speed Instrument Owner’s Handbook
to all other equipment on the SeaTalk network. A repeater instrument is not
directly connected to a transducer but displays information provided by other
equipment in the SeaTalk network.
The ST60+ Speed instrument can fulfil both master and repeater roles.
Stand alone operation
In Stand alone operation, the ST60+ Speed instrument is connected only to the
relevant transducer and does not display information from, or provide
information to, any other instruments.
Remote control
When connected to SeaTalk, the ST60+ Speed instrument can be controlled
remotely by a SeaTalk Remote Keypad Unit, to provide instant remote access to
the various display readouts.
Mounting options
A standard ST60+ instrument is surface-mounted at the required location. If you
do not want to surface mount your ST60+ instrument, options are available for:
• Flush mounting. If you have ordered the flush mounting option a flush mount
bezel and four fixing screws are provided.
• Bracket mounting.
81261_1.book Page viii Tuesday, November 29, 2005 12:42 PM
To Next Page
Loading...
