Raymarine ST60+ SPEED INSTRUMENT User Manual

2 ST60+ Speed Instrument Owner’s Handbook
Speed information
When power is switched on, the speed button gives you access to current speed,
maximum speed, average speed, velocity made good (VMG) and speed over
ground (SOG) information. Refer to the
Speed information flow diagram to
access the information you want.
Boat speed
The boat speed reading shows the current speed of the boat through the water.
Speed measurement units are either knots (KTS), miles per hour (MPH) or
kilometers per hour (KMH). You can select the units you want during user
calibration (see
Chapter 4, Calibration ).
Maximum speed
The maximum speed reading is reset at power up. You can also reset it manually,
by pressing the
reset button for 3 seconds. The display shows the maximum
Boat
speed
3 s
Speed over
ground
Velocity made
good
Maximum
speed
Average
speed
speed
speedspeed
speed
7 second timeout
7 second timeout
reset
Resets to current
boat speed
3 s
reset
Resets to zero
Speed information
speed
speed
D8139-1
81261_1.book Page 2 Tuesday, November 29, 2005 12:42 PM

Raymarine ST60+ SPEED INSTRUMENT Specifications

General

Brand	Raymarine
Model	ST60+ SPEED INSTRUMENT
Category	Marine Equipment
Language	English