Raytech TR–Mark III 250V - Result Display and Output; Turns Ratio vs. Voltage Ratio Display; Printing and Saving Test Results

Instruction Manual TR-Mark III 250V Version 1.10 Preliminary Page 21 of 57
8.1.2.3 Turns Ratio or Voltage Ratio, Print and Save
Of course TR-Mark III 250V provides conversion of voltage ratio in to turn ratio. You can
easily switch between these two options
After every measurement the results can be printed or stored. Use ‘Print’ and ‘Save’ to do
so.
NOTE
 ‘Save’ has only once an effect. To save several measurements, see
chapter ‘8.3.4 New Measurement’.
Turns Ratio and Voltage Ratio:
Tip here