Instruction Manual TR-Mark III 250V Version 1.10 Preliminary Page 41 of 57
8.6.1 General
8.6.1.1 License
License Manger is used to enter a Raytech License Number. If your license state changes,
you may be asked to enter a new License.
This menu displays the actual license state. Press the ‘Enter New License Key’ button to
enter a new License key number.
8.6.1.2 About
Choose this menu to get information about the instrument like Firmware version and Serial
number of the test system.
8.6.1.3 Clock
Use this menu, to set the date and time. This is important because your measurement will
contain a time stamp that will be saved to memory.
8.6.1.4 Cursor
This option is important when using a USB mouse. Use it to switch the cursor on or off.
8.6.1.5 Update
Raytech is always improving their products. Firmware updates may be available. Check the
Raytech website or contact Raytech for the latest update. These are provided at no charge.
The easiest way to receive an update is to save the newest version on a USB memory stick.
Then connect the USB memory stick to the instrument. The new version will automatically be
detected and the system will ask if you wish to update. If selected, this update process is
then fully automatic. In some cases it may be necessary to initialize the update manually.
8.6.1.6 Language
TR-Mark III 250V firmware supports several languages. Use this menu, to choose your
favorite language from a list of available languages.
8.6.1.7 Service
Only qualified personnel should access and service Raytech equipment. A service code is
required to obtain access to special service menus.
To Next Page
Loading...