Raytech TR–Mark III 250V - Operational and Output Settings; Operator and Standard Configuration; Printer and Display Color Options

Instruction Manual TR-Mark III 250V Version 1.10 Preliminary Page 42 of 57
8.6.1 Operators
Every measurement can be stored with the name of the actual operator. In this menu, new
operators can enter their first name and last name. Existing entries can be changed.
Touch an operators name and then touch ‘ok’ to make your choice.
Note the ‘Ask for Operator at Power-up’ check box. When checked, you will be asked if the
chosen operators name is yours. This may be helpful, when several operators are using the
same TR-Mark III 250V.
8.6.2 Standards
TR-Mark III 250V supports several international transformer standards. Use this menu to
choose the one you prefer.
8.6.3 Printer
If you are up to use an external USB Printer, you should choose the correct emulation.
Connect your USB Printer to TR-Mark III 250V’s USB host connector
2
. Maybe you would like
to print a test page, to make sure everything works properly.
To use the auto print option on the internal printer, choose this option in printer menu.
8.6.4 Color
Two recommended color schemes are available. Indoor and in moderate sunlight you may
prefer the colored scheme.
In bright sunlight black and white provides maximal contrast to make sure everything stays
readable.
2
The USB host has an oblong connector, USB device has square connector.