Instruction Manual TR-Mark III 250V Version 1.10 Preliminary Page 56 of 57
D Troubleshooting
System does not display anything:
1. Check the display for any Initialization.
2. Check the fuse. The fuse is located in the Power switch / plug connector.
Please see chapter ‘5.1 Front Panel Overview’. You fill find it at position 1.
Touch Panel does not work:
Please connect any USB mouse to the USB port on the front panel
TR-Mark III 250V will display a cursor and everything can be done by mouse. Please see
chapter ‘7.5.1.4’ if cursor is not automatically displayed.
Measurement cannot be started:
Is the Emergency stop switch pushed in? Turn to release it.
USB Memory Stick does not work:
There are a few unsupported memory sticks available on the market. Please use another
model and try again.
NOTE
TR-Mark III 250V is designed to be trouble free.
If problems or questions do arise please contact your nearest dealer or
one of our service support groups:
Switzerland: USA:
Tel. +41 56 648 6010 + 267 404 2676
Fax. +41 56 648 6011 + 267 404 2685
Website: www.raytech.ch www.raytechusa.com
Email: welcome@raytech.ch Sales@RaytechUSA.com
To Next Page
Loading...