EasyManua.ls Logo

RayTek MARATHON FA - Page 55

RayTek MARATHON FA
67 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Maintenance
Marathonî ±Seriesî ±FA/FRî ± 47
Theî ±relayî ±isî ±controlledî ±byî ±theî ±temperatureî ±selectedî ±onî ±theî ±display.î ±Ifî ±anyî ±failsafeî ±codeî ±appearsî ±onî ±theî ±
display, the relay changesto the “abnormal” state.The exception is the “dirtywindow” condition.
Thisî ± causesî ± theî ± relayî ± toî ± changeî ± state,î ± leavingî ± aî ± normalî ± numericalî ± temperatureî ± output.î ± Theî ± dirtyî ±
windowî ±isî ±detected
ineither1‐coloror2‐colormode.
Error Code
0 – 20 mA Output 4 – 20 mA Output
no error according to temperature
according to temperature
ECHH 21 to 24 mA 21 to 24 mA
ECUU 0 mA 2 to 3 mA
EIHH 21 to 24 mA 21 to 24 mA
EIUU 0 mA 2 to 3 mA
EUUU 0 mA 2 to 3 mA
EHHH 21 to 24 mA 21 to 24 mA
EAAA 0 mA 2 to 3 mA
Tableî ±11:î ±Currentî ±Outputî ±Valuesî ±inî ±accordanceî ±toî ±anî ±Errorî ±
Iftwoerrorsoccursimultaneously,thehigherpriorityerroristheonethatispresentedontheLED’s
digitalandanalogoutputs.Forexample,in2‐colormode,iftheinternalambientistoohighandthe
attenuationî ± isî ± tooî ± high,
 the unit outputs EIHH on the LED’s and digital output and 21 mA on the
analog output. However, since 2‐color wide band and narrow band temperatures may all be
presentedî ±simultaneouslyî ±throughî ±RS485,î ±theirî ±overî ±andî ±underî ±rangeî ±conditionsî ±areî ±independent.î ±
î ±
Examplesî ±ofî ±failsafeî ±conditions:î ±
1. One‐color temperature
 is selected for display on the LED’s. Two‐color temperature is
transmittedinburstmode.Widebandtemperatureisunderrange.Two‐colortemperatureis
999°C.
î ± Outputs:î ±
î ± Display:î ± EUUUî ±
î ± RS485:î ± Cî ±T0999î ±
î ± Analog:î ± 2î ±toî ±3î ±mAî ±
î ± Relay:î ± abnormalî ±stateî ±
2. Two‐color temperature is selected for display
 on LED’s. All three temperatures are
transmitted in burst mode. Two‐color temperature is 1021°C. Wide band temperature is
703°C. Narrow band temperature is 685°C. Attenuation is above 95%, the “dirty window”
threshold.î ±
î ± Outputs:î ±
î ± Display:î ± 1021î ±
î ± RS485:î ± Cî ±T1021î ±W0703î ±N0685î ±
î ± Analog:î ± scaledî ±toî ±temperature,î ±betweenî ±4î ±andî ±
20î ±mAî ±
î ± Relay:î ± abnormalî ±stateî ±

Table of Contents