Playback Operation and How to Copy Tapes on the VCR
1. A. Camcorder connected directly to
TV monitor: Turn on the TV and
tune it to the video input channel.
B. Camcorder connected to VCR that
is already connected to TV: Turn
on VCR and place it in the "line" or
"camera mode". (If your VCR does
not have a "line" or "camera
mode", consult the VCR owner's
manual.) Operate the TV as you
normally do to see the signal
coming from the VCR.
2. Attach a power supply and place the
camcorder's CAM/OFF/VCR switch in
VCR. Insert the cassette you want to
play back.
3. Press PLAY to begin playback.
During playback, use the features on
page 53.
4. To copy what the camcorder is
playing, place a blank cassette in the
VCR and press record button on VCR.
5. Press STOP when you are finished.
°
A. Camcorder connected directly to
TV: Turn on the TV, and tune it to
the video input channel.
B. Camcorder connected to VCR that
is already connected to TV: Turn
on VCR and place it in the "line" or
"camera mode". (If your VCR does
not have a "line" or "camera
mode", consult the VCR owner's
manual.) Operate the TV as you
normally do to see the signal
coming from the VCR.
2. Attach a power supply and slide the
camcorder's CAM/OFF/VCR switch
in CAM. Insert a cassette if you want
to record.
Note: When the camcorder is used as a
camera, turn the TV's volume down to
prevent a high-pitched squeal caused by
feedback.
3. Press the camcorder's thumb trigger
(PA USE/RECORD on remote) to begin
recording. You can watch what the
camcorder is seeing (or recording) on
the TV screen.
55
To Next Page
Loading...
