CREATE PRESETS
1. Set up the camera how you want the preset to be configured. For example, if you want to create a preset
specifically for your zebra indicators, first go to Menu > Settings > Display > Zebra and configure the zebras the
exact way that you want them to be in the preset.
2.
Go to Presets > Camera Presets.
3.
Select Create, or select an existing preset and select Clone or Update.
4.
If creating a new preset, enter a name for the preset and select OK.
5.
Select the following tabs to display different sets of preset options: Display, Key, Look, Project, and System.
6. Select the following:
: Add selected setting to the preset.
All: Add all settings to the preset.
X: Remove selected setting from the preset.
7.
Select Create.
The preset is saved and stored in the camera.
IPP2 PREVIEW PRESET
The IPP2 (Image Processing Pipeline) Preview preset is available on the RED EPIC-W 8K and WEAPON 8K S35.
The IPP2 Preview preset applies the following Look settings (Menu > Settings > Look > Video):
Color Space: REDWideGamutRGB
Graded Gamma Space: Log3G10
LUT: IPP2 Preview.cube (a 33x33 3D LUT)
All monitor outputs are set to Look B (which includes the Look settings described above)
C OPYRI GHT © 2017 R ED.C O M , I NC 955- 01 38 _V6.3, REV-D | 155
WEAPON/EPIC-W OPERATION GUIDE
To Next Page
Loading...
