DSMC2 V-LOCK I/O EXPANDER
Figure: DSMC2 V-Lock I/O Expander
The DSMC2 V-Lock I/O Expander offers a variety of Input/Output connections, as well as an industry standard V-Lock
mount to power your DSMC2 camera using RED BRICK batteries.
The DSMC2 V-Lock I/O Expander also features a selector switch that enables the BRAIN to automatically boot when
power is provided via the DC IN connector on the expander. This feature allows you to use a connected DC input
supply to turn the BRAIN on and off when the camera is mounted in remote or difficult to maneuver locations.
This expander is an ideal solution for a wide variety of production environments—from low-profile run-and-gun
situations to studio shoots that require mobility.
NOTE: The DSMC2 Top Handle may not be fully compatible with the DSMC2 V-Lock I/O Expander, as the top handle
may interfere with the battery when one is attached to the expander module.
NOTE: Only one (1) expander module can be used at a time.
C OPYRI GHT © 2017 R ED.C O M , I NC 955- 01 38 _V6.3, REV-D | 23
WEAPON/EPIC-W OPERATION GUIDE
To Next Page
Loading...
