Reolink C2 User Manual

: Call, click this button, the camera will turn to the preset position you have
chosen.
How to set preset
1. Click the directional arrows on the pan/tilt wheel to turn the camera lens.
2. when it points to the position you prefer, choose Preset 1(highlighted in
yellow color), then click the button to record the preset position, Enable
status will become Set.
3. When you need to set another preset, repeat the above steps, and choose
Preset 2.
4. If you want the camera to turn to the preset you already set, choose the
Preset Point Name, then click the button.
➢ Cruise Path
1. Choose Cruise Path 0 and go to to enter the Cruise Setup page.
2. Choose Cruise Point 1 and go to Cruise Point Setup.
13

Reolink C2 Specifications

General

Brand	Reolink
Model	C2
Category	Security Camera
Language	English