4.5 Device Settings > System
Under this menu, you may check the system information of the device, configure
the time settings, upgrade the firmware of the camera and reboot it.
4.5.1 System > General
Under General, users can set up the Video Standard and time settings etc.
➢ Video Standard: Choose PAL or NTSC according to your area. If this is set
incorrectly, the camera’s picture may be black and white, flickering or similar.
● PAL: used in Western Europe and Australia.
● NTSC: used in the US, Canada and Japan.
➢ Time Zone: Choose the time zone where you are.
➢ Date Format: the format of the date you want the camera to show.
➢ System Time: the current time of the camera. It could be edited manually.
➢ Synchronize Local Time: Click to synchronize the camera time with local PC
time.
➢ DST Settings: Turn on and set up DST if DST is applied in your area, As to how
to configure it, please refer to How to configure DST Settings.
➢ Enable Password: Enable or disable the password to login the camera.
➢ Device Name: Shows the name of your camera. You can modify the name here.
Click OK to save and enable settings.
42
To Next Page
Loading...
Need help?
General
