connection.
2. When changing the settings, they should always be made first in the camera and
then in the wireless router. This ensures that the camera is always accessible when
making changes.
4.4 Device Settings > Alarm
The camera will detect motion when there is a change in the picture. Check the
Enable box to enable motion detection. you can set up the sensitivity, schedule,
motion area
on this page.
Note:
Don’t use PTZ system and motion detection simultaneously.
4.4.1 Motion > Sensitivity
It means how sensitive the camera will be to the change of the environment. Drag
the slider to change the sensitivity value. The lower the number is, the more
sensitive the motion detection will be, and the more frequent motion will be
triggered.
Click the Setup button to enter the Sensitivity setup page.
38
To Next Page
Loading...
Need help?
General
