Tips:
1. The day is divided into four periods by default, you may change each period’s start
and end time to best match the changing lighting conditions in your location.
2. During the daytime, the light is good enough for the camera to capture the whole
scenario, the sensitivity is suggested to set the values between 5–10 which will give
good results.
3. During the night time, the motion detection is more sensitive, the value is suggested
to set to 25-30 or even higher which will significantly avoid some fault trigger.
Note:
The motion detection will be affected by the light and weather, it is suggested that
you should test your motion detection sensitivity both during the day and at night
to ensure your sensitivity setting is suitable for either lighting condition.
➢ False Triggers: Setting the motion detection at high sensitivity levels (4 or lower)
increases the frequency of false alarms. On the other hand, low sensitivity levels
(20 or higher) increase the risk that a significant motion event (such as an intruder)
will not trigger the motion detection to record.
➢ Check the Motion Detection settings both during the day and night: In
low-light conditions (or when your cameras are using infrared night vision) the
Camera may be more or less sensitive to motion, depending on the
circumstances. The difference might be very dramatic!
➢ Weather: The weather conditions are going to affect your motion detection.
Dramatic weather phenomenon such as heavy rain, strong winds, lightning and so
on, may trigger the motion detection with surprising frequency. On the other hand,
things like fog, mist and other obscuring kinds of weather might mask or obscure
something moving to the point that the Camera fails to detect them.
39
To Next Page
Loading...
Need help?
General
