➢ Auto reboot at: Choose when you’d like the camera to reboot.
➢ Default Settings: Click Restore to reset the camera to factory default.
➢ Configuration: Export or import the configuration file including all the settings
done to the camera.
➢ Firmware Upgrade: Instructs the Camera to update its firmware.
How to upgrade firmware
1. Download the firmware from Reolink official website: https://reolink.com/firmware/
2. Go to Device Settings > System > Maintenance, click on From Local.
3. Click on Browse to locate the upgrading file (end with pak), click on Upgrade to
upgrade the firmware.
Note: It is suggested to check Update Configure File when upgrading the firmware.
And the configuration set to the camera will be erased, you will need to configure the
camera again.
45
To Next Page
Loading...
