4.3.4 Wi-Fi Settings
You can configure the Wi-Fi settings and connect your camera to a wireless
network on this page.
➢ SSID: Wireless Network Name, it displays the wireless network name you
are connected or prepare to connect.
➢ Password: Input the Wi-Fi password of SSID you choose.
➢ Show Password: Tick to show the password.
How to connect to a wireless network
1. Click the Scan button, it will show all the SSIDs and the Wi-Fi Signal
Strength.
2. Double click on the Wi-Fi network you want to Join, the SSID will show in the
SSID field.
3. Enter the Wi-Fi password of the SSID you choose. You may click Show
Password to display the password you entered, double check whether it is
correct.
4. Click on Wi-Fi Test to test if the WIFI Setting is succeeded. If Wi-Fi Test
Succeed, click OK to save the settings.
If Wi-Fi Test Failed, please check:
a) if the password is correct.
b) If the Antenna on Wi-Fi Camera connected properly.
c) if the Wi-Fi Router working properly.
Note:
1. The wireless network has to be set up by using cable network connection. After
setting up successfully, you can remove the cable and use the camera via Wi-Fi
37
To Next Page
Loading...
Need help?
General
