Reolink C2 User Manual

4.6 Device Settings > Device
Users can check the SD card info or format the SD card on this page.
Note:
1. This option will only be available when SD card has been inserted.
2. Before insert the SD card, please power off the camera, otherwise, SD card
may not be recognized by the camera.
47

Reolink C2 Specifications

General

Image Sensor	1/2.7" CMOS Sensor
Frame Rate	20fps
Lens	f=4.0mm fixed lens
Pan/Tilt Angle	Pan: 355°
Audio	Built-in microphone
Wireless Standard	IEEE 802.11b/g/n
Operating Frequency	2.4GHz
Wireless Security	WPA/WPA2
Ethernet	10/100Mbps RJ45 port
Storage	Micro SD card
Power Supply	5V/2A DC adapter
Operating Temperature	-10°C to 55°C (14°F to 131°F)

Summary

Chapter 2 Install Reolink Client software

2.1 Connection Diagram

Illustrates how to connect the Reolink camera to the network and power source for initial setup.

2.2 & 2.3 System Requirements and Installation

Outlines computer requirements and the step-by-step process for installing Reolink Client software.

Chapter 3 Overview of Client Software

3.1 Live View and Basic Controls

Explains the live view interface, icons, and basic camera controls like zoom and pan/tilt.

3.2 Local Settings Configuration

Details how to configure general, recording, and transcoding settings within the Reolink client software.

3.3 Playback and Downloading

Guides users on playing back recorded video locally and remotely, and downloading footage from the SD card.

Chapter 4 Camera Configuration

4.1 Device Display and Privacy Mask Settings

4.2 Recording Settings

4.3.1 General Network Settings

4.3.2 Advanced Network Settings

4.3.4 Wi-Fi Settings

Guides on configuring Wi-Fi settings and connecting to a wireless network.

4.4 Alarm and Motion Detection

4.5 System Settings

4.7 User Account Management

Chapter 5 Basic Settings

5.1 OSD and Encode Settings

5.3 Image Adjustment

Chapter 6 Advanced Settings

Advanced Camera Settings