Reolink C2

➢ Network Access: select how you want the camera to get an IP address.
○ DHCP: Select this option when a DHCP server is installed on the network,
an IP address will be automatically issued. This is the default way of the
camera.
○ Static: Select this option when a fixed IP address is set. It is suggested to
do a IP reservation on your router for the camera in order to avoid IP
conflict.
➢ IP Address: enter a fixed IP address for the camera in dotted-decimal
notation.
➢ Subnet Mask: Enter a subnet mask in dotted-decimal notation.
➢ Gateway: Enter a default gateway in dotted-decimal notation.
➢ Preferred DNS: Enter a DNS address in dotted-decimal notation.
➢ Alternate DNS: Enter a DNS address in dotted-decimal notation
➢ MAC Addr: Displays the MAC address of the camera, the MAC address is
read-only.
Click OK to save and enable the settings.
27