Check the box to enable DDNS.
➢ DDNS Server Type: Choose the DDNS server, the camera current supports
NO-IP and DynDNS.
➢ Server Domain Name: Enter the hostname that you set up in your DDNS
service. This is the address you use to access your network.
➢ User Name: Enter the username you set up with your DDNS server.
➢ Password: Enter the password you set up with DDNS server.
➢ Confirm Password: Re-type the password to confirm.
Click OK to save and enable settings.
NOTE: If test is unsuccessful, a message will appear on screen informing you that
“Update was Unsuccessful”. This could mean that there’s a problem with
your network setup, or there’s a problem with the DDNS Account Name and
Password you’re using.
29
To Next Page
Loading...
Need help?
General
