EEPROM , Repetier Server
Before changing values in EEPROM, create a backup of your existing les. Use the button “Exportiere
EEPROM Daten” to save your settings as a .epr le. Following this, you must save the imported settings.
5.6 LOG-Files
Repetier-Server can record the communication with the 3D printer and provide a protocol of it as a text le.
A maximum of 5 log les can be stored. From then on each further task will delete the oldest entry.
To record a 3D print you just must check the two boxes It is not possible to log already started print jobs. You
must restart your 3D printer if you want to record a specic print job.
Log-les, Repetier-Server
29/45
To Next Page
Loading...
