RGBlink CP 3072 User Manual

CP 3072 User Manual 69
Figure 6
(6) Exit the program after upgrade, and power off, then dial the dial switch downwards.
2. Core Processing Firmware Upgrade
Upgrade by windows control program ”UpdateProgram.exe”, the form of the file is.bin.bin,
and upgrade steps are as follows:
(1) Connect the USB interface of CP 3072 to the computer with a USB cable.
(2) Plug in the power cord, and make sure the device is in normal operation.
(3) Open the windows control program, click the serial icon on top left corner to
set the serial, choose the serial port that connected to the computer, and set BaudRate
as 115200, click “OK” after setting.

RGBlink CP 3072 Specifications

General

Brand	RGBlink
Model	CP 3072
Category	Control Panel
Language	English