CP 3072 User Manual 70
Note: If not recognize the serial port, please check if install the USB driver correctly.
User can download the VCP_V1.3.1_Setup.exe file after install the USB driver.
Choose the system type (32 bit or 64 bit). User can also download the driver wizard or
driver home on internet to test and install the driver.
(4) After choose the serial port, show the log option as , choose
“Pithy”, then click button, when prompt ,
choose the upgrade file, ( the form of the file is.bin.bin ), and click “Start” to upgrade
core processing firmware.
(5) When prompt “Down Load Success”, it means load is successful.
(6) Reboot the device.
To Next Page
Loading...
Need help?
General