RichAuto A11 - Page 40

RichAuto S & T Co., Ltd
Add: 5th floor, No.4 building, No 4. Yard, life Rd, life science park, beiqing St., changping district Beijing, China
Tel：010-53275118 Fax：010-53275110/53275111 Web site：www.richnc.com.cn
35
6. Probation Pas（Probation Password）：
If engraving machine manufacturers setting some kinds of passwords before
shipment(including probation password and backup password, etc.), if you forget the
original password, you can connect our company and tell us 20-digit here, our
company will provide you a new 20-digit password，you need enter the new 20-digit
password，and then all the passwords will be cracked.
Setting：Press “ ”to enter “Probation Password”，inpur the new password，
and then press“ ”to save.
7. Backup Pas（Backup Password）：
Prevent users overwritten the original correct parameters in the parameter
backup disorder or misuse case. To cancel, you do not input any number when you are
prompted to enter a new password，press " " to save.
8. Input Port(Input Port List)：
1-3:X,Y,Z home signal 4: Tool setting input signal
5-7:Driver alarm,Hard limit,E-stop signal
9. Output Port(Output Port List)：
1：Spindle On/off signal 2-4: Spindle speed signal 5: Driver alarm signal
6：Work LED signal
10. Buttons Check：
Users can check buttons are valid or not under this menu.Enter“Buttons
Check”，press erery button，if it is valid，the screen will highlight.Exit“Buttons
Check”， press “ ”+“ ”.
11. Backup Data：