To specify a folder, you can either enter the path manually or locate the folder by browsing the
network. See "Locating the folder manually" and "Locating the folder using Browse Network".
22. Press [Com.Test] to check the path is set correctly.
23. Press [Exit].
24. Press the [Escape] key.
25. Press [End].
26. Press the [OK] key.
27. Press the [User Tools/Counter] key.
• To register the name, see "Registering Names".
• You can enter up to 64 characters for the user name.
• If you select [NDS] for the connection type, after the user name, enter the context name where the
user object resides. If the user name is "user" and the context name is "context", the user name you
would enter is "user.context".
• You can enter up to 64 characters for the password.
• To specify a folder, you can either enter the path manually or locate the folder by browsing the
network.
5. Registering Addresses and Users for Facsimile/Scanner Functions
310
To Next Page
Loading...
