Overview
SM 17 D372
500-Sheet
Finisher
D372
2.1.2 EXTERNAL DIMENSIONS
2.1.3 GENERAL OPERATION
Here is a brief summary of what happens inside the finisher. For more details, see the other
sections of this manual.
First, the operator pulls out the tray extension [1], and selects the paper size and operation
mode for the job (Normal, Shift, or Stapling).
Paper Transport
The entrance sensor [2] detects the paper when it enters the finisher. The entrance rollers
[3] feed the paper to the exit rollers [4]. The paper falls between the front and side fences
[5].
To Next Page
Loading...
