Installing Controller Options
SM 15 D383
Printer/
Scanner
Option
D383
1.3.2 IEEE 802.11A/G (D377)
Accessories
Check the accessories and their quantities against the following list:
No Description Quantity
1 IEEE 802.11a/b Interface Board 1
2 Antenna Cables 2
3 Antenna Clamps 8
Installation
Turn off the main power switch and disconnect the power supply cord.
1. Remove the plastic application cover ( x1).
2. Remove the cover [A] of the board slot ( x1).
3. Insert the interface card [B] as shown above.
Use a screwdriver to tighten the knob-screws. Do not tighten manually,
because this can disconnect the board.
1. Look at the markings on the antenna bracket.
To Next Page
Loading...
