Data Overwrite Security Unit (D362-11)
SM 1-81 D017/D018/D019/D020
Installation
5. Remove the plastic application cover [A] ( x1).
6. Insert the SD card [B] in SD Slot 1 (upper).
7. Reconnect the network cable, if the network is connected to the copier.
8. Turn the main power switch ON.
9. Do SP5878-1 (Option Setup – Data Overwrite Security) and touch [EXECUTE].
10. Go out of the SP mode, turn the operation switch off, then turn the main power switch
OFF.
11. Turn the machine power ON.
12. Make sure the ROM number and firmware version in area [a] of the diagnostic report
are the same as those in area [b].
• [a]: “ROM Number/Firmware Version” – “HDD Format Option”
• [b]: “Loading Program” - “GW5a_zoffym”
Diagnostic Report: “ROM No. / Firmware
Version” [a]
“Loading Program” [b]
DataOverwriteSecurity Unit
HDD Format Option:
D3775912A / 1.01m
GW5a_zoffym:
D3775912A / 1.01m
13. Push [User Tools] and select System Settings> Administrator Tools> Auto Erase
Memory Setting> On.
⇒
Rev. 02/2008
To Next Page
Loading...
