Data Overwrite Security Unit (D362-11)
D017/D018/D019/D020 1-82 SM
14. Exit from User Tools mode.
15. Check the display and make sure that the overwrite erase icon [A] is displayed.
16. Make a Sample Copy.
17. Check the overwrite erase icon.
The icon [B] changes to [C] when job data is stored in the hard disk.
The icon goes back to its usual shape [B] after this function has completed a data
overwrite operation to the hard disk.
18. Do SP5990-005 (SP print mode - Diagnostic Report).
19. Exit SP mode.
20. Remove the Document Server and Scanner key-tops, and replace them with the blank
key-tops that are supplied with the kit.
[B]
[A]
[C]
⇒
Rev. 02/2008
To Next Page
Loading...
