Service Call Conditions
D017/D018/D019/D020 4-12 SM
switched on.
An obstruction (jammed paper, paper scraps, etc.) has blocked the
motor drive and caused an overload.
Paper lift sensor connection loose, disconnected, or damaged
Paper lift sensor defective
Tray lift motor connection loose, disconnected, or damaged
Tray lift motor defective
506 B Paper tray motor lock (optional Paper Tray Unit)
A motor lock signal is not
detected for more than 1.5
s or the lock signal is not
detected for more than 1.0
s during rotation.
An obstruction (jammed paper, paper
scraps, etc.) has blocked the motor drive
and caused an overload.
Paper tray motor connection loose,
disconnected, or damaged
Paper tray motor defective
LCT rear fence drive error
508 B
The return position sensor is not activated after the rear fence drive motor
has been on to lower the tandem tray for 8 seconds.
An obstruction (jammed paper, paper scraps, etc.) has jammed the rear
fence or motor
Rear fence motor connection loose, disconnected, or damaged
Rear fence motor defective
Return position sensor connector loose, disconnected, or damaged
Return position sensor defective
LCT side fence drive error
509 B
The side fence positioning sensor is not activated for more 3 seconds when
the paper stack in the left tray is moved to the right tray. The side fence
close sensor is not activated for more 3 seconds after moving the paper
stack to the right tray.
To Next Page
Loading...
