Service Call Conditions
SM 4-21 D017/D018/D019/D020
Trouble-
shooting
The jogger fence
motor in the finisher
is not operating.
Jogger motor drive is obstructed (jammed paper,
paper scraps, etc.)
The motor harness loose or broken
Jogger fence HP sensor dirty, loose, defective
Jogger fence motor defective
722 B Rear fence motor error
The rear jogger fence motor
in the finisher is not
operating.
Rear jogger motor drive is obstructed
(jammed paper, paper scraps, etc.)
The rear jogger fence motor harness
loose or broken
Rear jogger fence HP sensor dirty,
loose, defective
Rear jogger fence motor defective
723 B Feed-out belt motor error
The feed-out belt did not
return to the home position
within the prescribed time.
Feed-out belt motor drive is obstructed
(jammed paper, paper scraps, etc.)
Feed-out belt motor drive obstructed
(jammed paper, paper scraps, etc.)
Motor harness loose or broken
Feed-out belt HP sensor dirty,
disconnected, broken
Motor defective
725 B Finisher stack feed-out motor error
The stack feed-out belt HP
sensor did not activate within
the prescribed time after the
stack feed-out motor turned
on.
Finisher stack feed-out motor drive is
obstructed (jammed paper, paper
scraps, etc.)
Stack feed-out motor harness loose,
broken
Stack feed-out HP sensor harness
To Next Page
Loading...
