Service Call Conditions
D017/D018/D019/D020 4-22 SM
loose, broken
Stack feed-out motor defective
Stack feed-out HP sensor defective
730 B Shift tray motor error
The shift tray motor in
the 1000-sheet finisher
is not operating.
Shift motor drive is obstructed (jammed paper,
paper scraps, etc.)
Shift motor harness loose, broken
Shift tray HP sensor harness loose, broken
Shift motor defective
Shit tray HP sensor defective
740 B Corner stapler motor error
The corner stapler motor in
the 1000-sheet finisher is not
operating.
Staple jam
Number of sheets in stack exceeds
allowed number of sheets for stapling
Stapler motor obstructed
Stapler motor defective
742 B Stapler movement motor
The stapler movement motor
in the 1000-sheet finisher is
not operating.
Stapler or motor drive is blocked by
obstruction
Motor harness loose or broken
Stapler HP sensor harness loose,
broken
Motor defective
Stapler HP sensor defective
746 Stack feed motor error
The stack feed HP sensor in the 1000-sheet booklet finisher did not detect
"ON" twice (once: jam error) within the prescribed time after the stack feed
To Next Page
Loading...
