Service Call Conditions
D017/D018/D019/D020 4-24 SM
761 B Folder plate motor error
The folder plate in the 1000-sheet booklet finisher moved but was not
detected at the home position within the prescribed time. The 1st detection
failure issues a jam error, and the 2nd failure issues this SC code.
Folder plate motor drive obstructed
Folder plate HP sensor harness loose, broken
Folder plate motor harness loose, broken
Folder plate motor defective
Folder plate HP sensor defective
763 B Punch movement motor error
The punch unit moved but it was not detected at
the home position within the prescribed time. The
1st detection failure issues a jam error, and the
2nd failure issues this SC code.
Motor harness
loose, broken
Motor drive
obstructed
Motor defective
764 B Paper position slide motor error
The paper position sensor detected movement of
the slide but the slide was not detected at the
home position within the prescribed time. The 1st
detection failure issues a jam error, and the 2nd
failure issues this SC code.
Motor harness
loose, broken
Motor drive
obstructed
Motor defective
765 B Fold unit bottom fence lift motor
The fold unit bottom fence lift motor in the
1000-sheet booklet finisher is not operating. The
1st detection failure issues a jam error, and the
2nd failure issues this SC code.
Motor harness
loose, broken
Motor drive
obstructed
Motor defective
To Next Page
Loading...
