SP1xxx: Feed
SM 5-19 D017/D018/D019/D020
Service
Tables
1913 Tray 2: Auto Paper Size Detection
1914 Tray 3: Auto Paper Size Detection
1915 Tray 4: Auto Paper Size Detection
Some paper sizes are very nearly the same (A4, LT for example). The paper
size sensors are not sensitive enough to distinguish between such paper
sizes. Use these SP codes to select the paper size for the tray. A setting can
be done for each tray:
Tray 1: Upper Tray (Main Machine)
Tray 2: Lower Tray (Main Machine)
Tray 3: LCT Tray or Upper Tray: Paper Tray Unit
Tray 4: Lower: Tray Paper Tray Unit
1 Size 1: B5/Exe Landscape
2 Size 2: A5/HLT Landscape
3 Size 3: A4/LT
4 Size 4: A4/LG
5 Size 5: A3/LT
[0 to 1/0/1]
0: ISO (A3, A4, A5, etc.)
1: USA (DLT, LT, EXE, etc.)
Note: "Landscape" means LEF (Long
Edge Feed)
Max Fusing Lamp Duty DFU
1991
These SP codes are debugging tools.
1 Roller Center
2 Roller Ends
3 After Warming-up – Center
[40 to 100/80/10%]
4 After Warming-up - Ends [40 to 100/100/10%]
Mtr Rvrs Time at Fusing Drv Rls DFU
1992
This is a debugging tool.
[0 to 3/3/1]
To Next Page
Loading...
