SP2xxx: Drum
SM 5-23 D017/D018/D019/D020
Service
Tables
Left Side
5
Adjusts the left edge erase margin.
The specification is 2 ±1.5 mm. See “Replacement and Adjustment - Copy
Adjustment” for details.
[0.0 to 9.0 / 2.0 / 0.1 mm/step]
Right Side
6
Adjusts the right edge erase margin.
The specification is 2 +2.5/-1.5 mm. See “Replacement and Adjustment -
Copy Adjustment” for details.
[0.0 to 9.0 / 2.0 / 0.1 mm/step]
Rear – Trailing Edge (Duplex 2nd Side)
7
Adjusts the trailing edge erase margin on the reverse side of duplex copies.
The actual trailing edge erase margin on the reverse side is this value plus
the value of SP2101-2 or 3 or 4.
The specification is 3 ±2 mm. See “Replacement and Adjustment - Copy
Adjustment” for details
[0.0 to 9.0 / 1.2 / 0.1 mm/step]
Rear – Left Side (Duplex 2nd Side)
8
Adjusts the left side erase margin on the reverse side of duplex copies.
The actual left side erase margin on the reverse side is this value plus the
value of SP2101-5.
The specification is 2 ±1.5 mm. See “Replacement and Adjustment - Copy
Adjustment” for details.
[0.0 to 9.0 / 0.3 / 0.1 mm/step]
Rear – Right Side (Duplex 2nd Side)
9
Adjusts the right side erase margin on the reverse side of duplex copies.
The actual right side erase margin on the reverse side is this value plus the
value of SP2101-6.
The specification is 2 +2.5/–1.5 mm. See “Replacement and Adjustment -
Copy Adjustment” for details.
[0.0 to 9.0 / 0.3 / 0.1 mm/step]