SP4xxx: Scanner
SM 5-65 D017/D018/D019/D020
Service
Tables
Displays the factory setting values of the gain adjustment for Blue.
1 Factory Setting: BE Color
2 Factory Setting: BO Color
3 Factory Setting: BE BW
4 Factory Setting: BO BW
[0 to 255 / 0 / 1 digit/step
Gray Balance Set: R DFU
4685
Adjusts the gray balance of the red signal for each scanning mode.
1 Book Read
2 DF Read
[-512 to 511 / -240 / 1 digit/step]
Gray Balance Set: G DFU
4686
Adjusts the gray balance of the green signal for each scanning mode.
1 Book Read
2 DF Read
[-512 to 511 / -240 / 1 digit/step]
Gray Balance Set: B DFU
4687
Adjusts the gray balance of the blue signal for each scanning mode.
1 Book Read
2 DF Read
[-512 to 511 / -240 / 1 digit/step]
DF: Density Adjustment
4688
Adjusts the white shading parameter when scanning an image with the DF.
Adjusts the density level if the ID of outputs made in the DF and Platen
mode is different.
[50 to 150 / 109 / 1%/ step ]
To Next Page
Loading...
