SP5xxx: Mode
D017/D018/D019/D020 5-72 SM
1: Key Card (RK3, 4) Japan only
2: Key Card Down
3: Pre-paid Card
4: Coin Lock
5: MF Key Card (Must be enabled with SP5114)
11: Exp Key Card (Add)
12: Exp Key Card (Deduct)
External Optional Counter Type
2
Enables the SDK application. This lets you select a number for the external
device for user access control.
Note: “SDK” refers to software on an SD card.
[0 to 3/1]
0: None
1: Expansion Device 1
2: Expansion Device 2
3: Expansion Device 3
5114* Optional Counter I/F
MF Key Card Extension
001
Use this SP to change the setting to "1" only when the "5" (MF Key Card) is
selected with SP5113-001.
[0: Not installed/ 1: Installed (scanning accounting)]
5118 Disable Copying
Temporarily denies access to the machine. Japan Only
[0 to 1/1]
0: Release for normal operation
1: Prohibit access to machine
Mode Clear Opt. Counter Removal
5120
Do not change. Japan Only
To Next Page
Loading...
