SP5xxx: Mode
D017/D018/D019/D020 5-74 SM
2: 8.25" x 13"
Paper Size Type Selection
5131*
Selects the paper size (type) for both originals and copy paper.
[0 to 2 / DIP SW setting / 1 step]
0: Japan
1: North America
2: Europe
After changing the setting, turn the copier off and on. If the paper size of the
archive files stored on the HDD is different, abnormal copies could result.
Ask the customer to restore the archive files.
Bypass Length Setting
5150
Sets up the by-pass tray for long paper.
[0 to 1/1]
0: Off
1: On. Sets the tray for feeding paper up to 600 mm long.
With this SP selected on, paper jams are not detected in the paper path.
App. Switch Method
5162
Controls if the application screen is changed with a hardware switch or a
software switch.
[0 to 1/1]
0: Soft Key Set
1: Hard Key Set
Z-Fold Position (Not Used)
5165
Adjusts the position of the first fold to decrease or increase the distance
between the leading edge and the crease of the 2nd fold.
1 A3T (SEF) [-4 ~ +4/0/ 0.2 mm]
To Next Page
Loading...
