SP5xxx: Mode
SM 5-83 D017/D018/D019/D020
Service
Tables
0: Off
1: On
2
Panel Disp
Determines whether an error code appears on the operation panel after a
user authentication failure occurs.
[0 to 1/1/1]
1: On
0: Off
MF Keycard Japan Only
5490
Sets up operation of the machine with a keycard.
[0 to 1/0/1]
0: Disabled. Cancels operation if no code is input.
1: Enabled. Allows operation if another code is input and decrements the
counter once for use of the entered code.
5501* PM Alarm
PM Alarm Interval
1
Sets the PM interval.
The value stored in this SP is used when the value of SP5501 2 is “1”.
[0 to 255 / 0 / 1 k copies/step]
Original Count Alarm DFU
2
Selects whether the PM alarm for the number of scans is enabled or not.
If this is “1”, the PM alarm function is enabled.
[0 = No / 1 = Yes]
Jam Alarm Japan Only
5504*
Sets the alarm to sound for the specified jam level (document misfeeds are
not included). RSS use only
[0 to 3 / 3 / 1 step]
To Next Page
Loading...
