SP5xxx: Mode
D017/D018/D019/D020 5-84 SM
0: Zero (Off)
1: Low (2.5K jams)
2: Medium (3K jams)
3: High (6K jams)
Error Alarm
5505*
Sets the error alarm level. Japan only DFU
[0 to 255 / 50 / 100 copies per step]
5507 Supply Alarm
1
Paper Supply Alarm
(0:Off 1:On)
Switches the control call on/off for the paper
supply. DFU
0: Off, 1: On
0: No alarm.
1: Sets the alarm to sound for the specified
number transfer sheets for each paper size (A3,
A4, B4, B5, DLT, LG, LT, HLT)
2
Staple Supply Alarm
(0:Off 1:On)
Switches the control call on/off for the stapler
installed in the finisher. DFU
0: Off, 1: On
0: No alarm
1: Alarm goes off for every 1K of staples used.
3
Toner Supply Alarm
(0:Off 1:On)
Switches the control call on/off for the toner end.
DFU
0: Off, 1: On
If you select “1” the alarm will sound when the
copier detects toner end.
128* interval: Others
132* Interval: A3
133* Interval: A4
The “Paper Supply Call Level: nn” SPs specify
the paper control call interval for the referenced
paper sizes. DFU
[00250 to 10000 / 1000 / 1 Step]
To Next Page
Loading...
