SP5xxx: Mode
SM 5-95 D017/D018/D019/D020
Service
Tables
3 LCT
4 Finisher
either a “1” or “0” on the display.
1: Device connected correctly.
0: Device not connected correctly.
SC Reset
5810
Resets all level A service call conditions, such as fusing errors. To clear the
service call, touch “Execute” on the LCD, then turn the main power switch
off/on.
Machine No. Setting DFU
5811
This SP presents the screen used to enter the 11-digit number of the
machine. The allowed entries are "A" to "Z" and "0" to "9". The setting is
done at the factory, and should not be changed in the field.
5812 Service Tel. No. Setting
1 Service
Inputs the telephone number of the CE (displayed when a
service call condition occurs.)
2 Facsimile
Use this to input the fax number of the CE printed on the
Counter Report (UP mode). Not Used
3 Supply Displayed on the initial SP screen.
4 Operation
Allows the service center contact telephone number to be
displayed on the initial screen.
5816 Remote Service
I/F Setting
1
Turns the remote diagnostics off and on.
[0 to 2/1]
0: Remote diagnostics off.
1: Serial (CSS or NRS) remote diagnostics on.
To Next Page
Loading...
