SP5xxx: Mode
SM 5-105 D017/D018/D019/D020
Service
Tables
-2387 Not supported at the Service Center
-2389 Database out of service
-2390 Program out of service
-2391 Two registrations for same device
-2392 Parameter error
-2393 Basil not managed
-2394 Device not managed
-2395 Box ID for Basil is illegal
-2396 Device ID for Basil is illegal
-2397 Incorrect ID2 format
-2398 Incorrect request number format
Instl Clear
209
Releases the machine from its embedded RCG setup.
CommLog Print
250
Prints the communication log.
5821
Remote Service Address Japan Only
1 CSS PI Device Code
Sets the PI device code. After you change this
setting, you must turn the machine off and on.
2 RCG IP Address
Sets the IP address of the RCG (Remote
Communication Gate) destination for call
processing at the remote service center.
[00000000htoFFFFFFFFh/1]
5824 NVRAM Data Upload
To Next Page
Loading...
