SP5xxx: Mode
D017/D018/D019/D020 5-106 SM
Uploads the NVRAM data to an SD card (B140). Push Execute.
Note: When uploading data in this SP mode, the front door must be open.
NVRAM Data Download
5825
Downloads data from an SD card to the NVRAM in the machine. After
downloading is completed, remove the card and turn the machine power off and
on.
5828 Network Setting
1 IPv4 Address (Ethernet/IEEE 802.11)
This SP allows you to confirm and reset the IPv4 address for Ethernet and a
wireless LAN (802.11):
aaa.bbb.ccc.ddd
For example, if the 8-bit entry is "192.168.000.001" this is read
"0C0A80001h"
2 IPv4 Subnet Mask (Ethernet/IEEE 802.11)
This SP allows you to confirm and reset the IPv4 subnet mask for Ethernet
and a wireless LAN (802.11):
aaa.bbb.ccc.ddd
For example, if the 8-bit entry is "255.255.255.00" this is read "FFFFFF00h".
3 IPv4 Default Gateway (Ethernet/IEEE 802.11)
This SP allows you to confirm and reset the IPv4 default gateway used by the
network for Ethernet and wireless LAN (802.11):
aaa.bbb.ccc.ddd
For example, if the 8-bit entry is "192.169.000.001" this is read
"0C0A80001h"
6 DHCP (Ethernet/IEEE 802.11)
This SP code allows you confirm and change the setting that determines
whether the IP address is used with DHCP on an Ethernet or wireless
(802.11) LAN network.
To Next Page
Loading...
