1000-Sheet Booklet Finisher (B793)
D017/D018/D019/D020 1-50 SM
1. Unpack the finisher and remove all tapes and packing materials from the finisher.
2. Open the front door [A] of the 1000-sheet booklet finisher, and then pull out the jogger
unit [B].
3. Remove all tapes and packing materials from the inside of the finisher.
4. Attach the cushions [A] to the finisher.
Make sure that the cushions are placed within 0 to 1 mm [B] from the edge of
the cover or frame.
5. Install the ground plate [C] on the finisher [D] ( x 2; M3 x 8).
To Next Page
Loading...
