1000-Sheet Booklet Finisher (B793)
SM 1-51 D017/D018/D019/D020
Installation
6. Attach the rear joint bracket [A] ( x 1; M4 x 14).
7. Attach the front joint bracket [B] ( x 2; M4 x 14).
8. Remove the left support [C] from the optional paper tray unit or LCT.
9. Slowly push the finisher to the left side of the machine, keeping its front door open until
the brackets [A] [B] go into their slots.
10. Push the lock lever [C], and then secure it (Long knob screw x 1).
11. Close the front door of the finisher.
12. Connect the finisher connector [D] to the machine.
To Next Page
Loading...
